|
All systems come standard with high capacity resin tanks. If you are looking to purchase a salt-based system and you want the very best then the Pelican Advantage Series is your answer.
|
Watch our short video |
- Large tank size
- High capacity resin
- Easy-to-program metered electronic head
- High flow rate
- Standard bypass included
- Chrome tank jacket standard
|
- Premium Bypass Valve Included for Easy Maintenance
- Premium 4-Button Programmable Pro Series Electronic Head For Quiet and Efficient Performance
- Metered Delayed Backwash for Minimal Water Waste, Only Backwash When You Need To!
- Treated Water Regeneration - For Optimum Performance and Cleaning
- For full warranty information click here.
|
There Are 3 Important Steps To Softening:
- Backwashing Phase: This removes dirt from the mineral tank and is part of the regeneration process
- Regeneration Phase: The mineral tank is recharged with sodium from the brine tank solution and displaces calcium and magnesium, which is then washed down the drain during the Backwashing Phase.
- Rinse Phase: The mineral tank is rinsed with fresh water and loads the brine tank so that it is ready for the next cycle.
As water passes through the mineral tank, the positively charged calcium and magnesium ions are lost to negatively-charged plastic beads. The brine tank holds a solution of water and salt that flushes the mineral tank and replaces the calcium and magnesium ions with sodium. Recharging cycles are controlled by the meter on the top of the tank (normally once every 7 days).
|
| The Pelican Advantage Series Programmable Head Features |
back to top |
 Solid state microprocessor with easy front panel settings- Three modes of operation: Meter Immediate, Meter Delayed, Time Clock Delayed
- Double backwash feature, offering optimum regeneration, cleaning and efficiency
- 36 Selectable pre-programmed regeneration cycles
- Days override featured 1-28 days available
- Backwash and brining ability to 21" diameter tanks
- Downflow regeneration
- Stores system configuration and operation data in non-volatile memory
- Battery back-up with up to 8 hour power carry over
- 12 Volt transformer provides safe and easy installation
- Provides optimum service and backwash rates
- Treated water regenerant refill
|
Meter Immediate - When the Water Volume Remaining display has reached zero gallons, a regeneration cycle will be initiated immediately.
Meter Delayed - When the Water Volume Remaining display has reached zero gallons, a regeneration cycle will be initiated at the preset Regeneration Time Of Day chosen during setup (i.e. 1:00 am).
Time Clock Delayed - When the valve reaches its set Days Since Regeneration, a regeneration cycle will be initiated at the preset Regeneration Time Of Day chosen during setup (i.e. 1:00 am). This event occurs regardless of the Water Volume Remaining display having reached zero gallons.
|
Disclaimer: The information on this website has not been reviewed by the FDA. Products offered for sale herein are not intended to treat, cure or prevent any disease or health condition. No medical claims are being made or implied. |
Pelican Advantage Series 48000 Grain Softener is rated
4.5 out of
5 by
49.
Rated 5 out of
5
by
peggy from
Just what we need
After trying two other systems, this is the one we need for our home. No more mineral deposits, great taste and reliable operation!
Date published: 2021-03-21
Rated 5 out of
5
by
Cheri from
Wow quality system
Our Pelican salt water softener system really makes a difference. We highly recommend this unit, don't hesitate, wish we would have gotten this sooner. Great system and now is eliminating water spots & softer water for showering, dishes, etc. Love this Pentair Pelican systems.
Date published: 2021-03-17
Rated 1 out of
5
by
J. Isaacs from
This PS48 is terrible. Too much salt in the lines
This is our 2nd system from these guys. This one has not worked properly since install (by licensed plumber). The head settings were all screwed up and too much salt backing up from the system into the house. Third time having to call inside of 3 months. This was installed the first week of January 2021. Never get tech support on the phone. They never call back. Disgusted.
Date published: 2021-03-16
Rated 5 out of
5
by
Anonymous from
Easy
Easy to install and easy to program. It is working great!!!
Date published: 2021-03-04
Rated 5 out of
5
by
Char from
Can really feel a difference
Replaced a water boss unit with this system and can totally tell a difference.
Date published: 2021-01-18
Rated 4 out of
5
by
Dr.J from
2nd unit. Love my clean soft water
This is the second time I have installed a whole house Pelican water system in my home. The cost spent on this system will save dollars on costly appliance repair and pipe destruction. Works great.
Date published: 2021-01-16
Rated 3 out of
5
by
Allen from
Works great
We are very happy with our water since we have a well. Only problem we had was that when it came in it was very banged up. It was not protected very well and the housing was badly damaged and the base had come off. So far it has not affected the functionality.
Date published: 2020-12-16
Rated 5 out of
5
by
Leslie from
Pelican Advantage Series
I really like our new Pelican Water Softner, It gives nice water and it has a good memory for automatically flushing. It is nice to look at too.
Date published: 2020-12-12
Rated 5 out of
5
by
Zo Zien from
Great product!
I recently bought a PS48 water softener to replace my old inefficient one. This product looks handsome and well built. Installation was a breeze. I am happy with the overall purchase. I will definitely recommend this to my families and friends.
Date published: 2020-11-28
Rated 5 out of
5
by
Zo Zien from
Awesome customer service
I recently purchased a PS48 salt based water softener. During installation, I over tightened and cracked the nut that secures the drain tube to the barb. I called customer service and the gentlemen was very professional and helpful. Within an hour, I received an email informing me that my order was processed. I was very satisfied with the product and the overall experience. Thank you, Pentair!
Date published: 2020-11-26
Rated 5 out of
5
by
Mike D from
PS-48 QUALITY and INSTALLABILITY EXCELLENT
Pre-Purchase Pelican _ Consumer Interface was very good. Easy to find accurate information on details. Shipping after ordering was speedy. Arrived in good condition in very short time. Installation was straightforward with no surprises. Unions on the interconnection lines seem like a good idea. This makes it easy to correct any minor weeps on the Household to PS-48 threaded connections. Programmable Controller seems very high quality with very good and easy to set optionality. Over the next few regenerations will execute inlet and outlet hardness checks to insure that I (the consumer) have set up everything correctly and that performance is proper. Technical Consulting by Pelican is easy and highly appreciated
Date published: 2020-08-19
Rated 5 out of
5
by
Winni from
PS48 Salt Based Water Softener
Very solid product! Easy to install with almost instant positive results to my water hardness for the whole house. No noticeable loss of water pressure. Great service by Pelican professionals at all times!!!!
Date published: 2020-07-02
Rated 5 out of
5
by
Vlynn from
Basic but effective
This unit is easy to operate and functions as it should.
Date published: 2020-06-24
Rated 5 out of
5
by
Jonesy from
Does the job
Our 15 year old Kinetico water softener needed expensive repairs. Bought the Pelican instead and have been very pleased.
Date published: 2020-03-12
Rated 3 out of
5
by
giddyup from
looks pretty
not totally thrilled. guess our water is so hard nothing will help. system kept regening even when it wasn't supposed to, after using only 250 gallons) streaks and cloudiness still on dishes. lots of spots even with lemishine (been using that for 16 yrs w/o softener) and new buildup still building on fixtures. (I chiseled off all the old stuff best I could) oh well - just disappointed
Date published: 2020-02-20
Rated 5 out of
5
by
Edgar from
Amazing system!!!
Love this water softener and filtration system. It is exactly what we need to tackle the north Texas hard water. Love it and extremely happy! Highly recommend!!!
Date published: 2020-02-04
Rated 5 out of
5
by
000000000000 from
Very happy
The entire experience has been great. All of the people I have dealt with were friendly and knowledgeable. The unit was easy to install with easy step by step instructions and seems to be doing a really good job of treating our water. Positive experience.
Date published: 2019-12-30
Rated 5 out of
5
by
Jerry from
Great company and support
I purchased this unit about a month ago. I called to verify I& it was right for my home and inquired as to installing it myself. They were very helpful and it was shipped on time. Great company and product.
Date published: 2019-12-04
Rated 5 out of
5
by
Wizard from
Outstanding Unit
I purchased the PS48 about one month ago. Installation was very easy and the unit is working perfect. Customer service is outstanding. Everyone that I talked to was well versed with the unit and extremely helpful. I am so glad we went with Pelican.
Date published: 2019-11-30
Rated 5 out of
5
by
Janice from
Great features
I bought this item 3 month it working very excellent
Date published: 2019-10-03
Rated 5 out of
5
by
Jerry from
Nice
I bought this about one month ago, my other water softener went bad. It was easy in install took me around one hour. So far it's working great!
Date published: 2019-09-12
Rated 5 out of
5
by
Rondunn98 from
Great product
I bought this system 2 weeks ago and the results are wonderful
Date published: 2019-06-27
Rated 5 out of
5
by
Sam19 from
Great quality
I’m very happy with the softner. It does a great job of softening the water.
Date published: 2019-04-26
Rated 4 out of
5
by
Foss from
Good looking unit
Purchased over a month ago but just got around to installing it this past week. Had to remove the existing water softener and replumb and was a busy time for us so I just couldn’t get to it. Installation was easy after my plumbing job and instructions are thorough and the electronic module was very easy to program. It’s only cycled once so it’s hard to give it five stars since it’s only in the beginning of it’s operation but I’m pretty sure it will get there.
Date published: 2019-02-28
Rated 5 out of
5
by
Michael or Mike from
Great Features!
I purchased this a month ago and i am very happy with the system!
Date published: 2019-02-19
Rated 5 out of
5
by
Lewaire from
Quality Product
Purchased a few weeks ago PS48 to go into our new home. Had a water loop put in during construction. After much research, and previous experience with softeners in other homes, came to this model for overall features, capacity, warranty and value. Installation instructions straight forward and was easy to install. Michael was knowledgeable and answered all my questions prior to ordering. Works great!
Date published: 2019-01-08
Rated 5 out of
5
by
Scott from
Great system!
I purchased this system around a month ago, and it has been awesome! My water quality is much better, and with very little maintenance and upkeep required to keep it that way. Customer service was also great! I called the Pelican rep 4-5 times with many questions, and they were always willing to spend the time answering them.
Date published: 2018-12-27
Rated 5 out of
5
by
popps from
Great job clean water finally
Took a few days to clean up the water after that water is great
Date published: 2018-12-08
Rated 5 out of
5
by
Bob1966 from
Great customer service
So far I love my new pelican water filter. At first I had a little problems and James and Robert were able to help me out within a phone call very helpful and yes I would recommend a Pelican home filter for anyone who has water issues
Date published: 2018-12-04
Rated 5 out of
5
by
Pete from
Pelican system
This system works really great. Softening is fantastic. No more rust stains and water tastes fantastic. Thank you Pelucan.
Date published: 2018-09-07
Is it easy to install
Asked by: Barbra
Buy from a local water filtration company. They will know what you need, how to set it up and they will install it properly. Most plumbers can plumb the connections, but then haven't a clue what to do next.
They don't how to start them up correctly or make any adjustments that will be needed for the system to work optimally in your particular situation. They have no spare parts with them if needed. They probably won't know how to tell you to keep your new system in good condition.
Answered by: Bob The Water Filter Guy
Date published: 2021-10-05
We have the PSE 2000 softener/filter combo in use for the past 2 years on a Caribbean island. This works fine while on rain water but not on well water. Is the PS80 compatible and can I use Pool salt as I dont think any other salt products are available
Asked by: Paul
The PS80 can be used on well water. As long as the salt you use has no additional additives in it, you can use any form of salt you want for the brine tank.
Answered by: Pelican Water
Date published: 2021-06-03
Is the system installed by a professional or is it simply shipped and I have to find a way to get it installed?
Asked by: Fred
You need to find your own installer/plumber
Answered by: J. Isaacs
Date published: 2021-10-07
Are these systems installed by the consumer?
Asked by: Shari68
Yes they can be or you can hire a local plumber.
Answered by: Pelican Water
Date published: 2021-01-25
Can I use KCL?
Does the resin ever need replaced? Our average daily water usage is about 200 gal/day.
Asked by: Allen
You can use potassium chloride versus sodium chloride but you will have to adjust the programming of the system to account for that. For help on determining those settings just reach out to our technical support staff.
Answered by: Pelican Water
Date published: 2020-09-09
Will this system increase the PH level in my water? My PH tests @ 6.5 & I was told it should be around 7.
Asked by: Bigdawg041
No this is a water softener. To raise the pH of water you need a pH system which we offer, however even those systems will likely not be any good for you. Typical pH of city water is anywhere from 6.5-7.5 depending on your water chemistry. At 6.5 a pH will be hard pressed to raise it much using standard calcite.
Answered by: Pelican Water
Date published: 2020-07-30
What kind of maintenance is there with the Natursoft water softner system. Is there any filters or media that need to be replaced at certain intervals
Asked by: Fanano614
Diameter & height of brine tan?
Asked by: Eddie
 |
| National Sanitation Foundation (NSF) Certification |
back to top |
|
| Q. Why should I choose the Pelican Water Softener over the others on the market? |
The Pelican line of water softeners is designed with the highest quality materials on the market today. Pelican Water Softeners utilize the top of the line electronic heads along with features that save you time and money. Quality costs more to make, we would rather build quality than apologize for its absence. Pelican Water Technologies is a leader is advanced water treatment and is dedicated to the future of water treatment methods and ways to improve water for the end user.
|
| Q. Can the Pelican Water Softeners be installed outdoors? |
Pelican water softeners should be protected against the weather when they are installed outside. The electronic head should be shielded from water.
The decision to install a water softener outside depends on the part of the country you live in. For example, if it seldom freezes, it may be acceptable to install a water softener outside, but sun, wind, and rain can still reduce their longevity. Ultraviolet light can damage the plastic components, while rain and high humidity have an undesirable effect on the electronics and mechanical parts. If you decide to install a water softener outside, it is advised to protect it from the elements with a weatherproof cover or cabinet.
|
| Q. How long does the resin last in the Pelican Water Softeners? |
Resin life depends on several factors, including the amount of chlorine, quality of resin, and number of regenerations. The average life of resin is typically 7-15 years. If the chlorine is removed from the water with a carbon pre-filter such as the Pelican PC600 or PC1000, thereby preventing it from reaching the resin, the resin could last up to 25 years.
While a water softener resin bed normally can last as long as 15 years, iron in well water and excessive amounts of chlorine in city water can damage a resin bed. If your water softener is using up salt at its regular rate and water is no longer being softened, the resin bed is likely saturated with iron deposits or damaged by chlorine. When this happens, it can no longer be regenerated by the brine and needs to be replaced.
|
| Q. If I am on a sodium-restricted diet or suffer from hypertension is there a substitute for salt that I can add to the Pelican Water Softeners? |
Yes, potassium chloride can be used instead of salt. While potassium chloride is a more expensive alternative, it is well worth the cost when you consider the benefits.
According to the Mayo Clinic, levels of sodium in drinking water are very low in most water systems. An Environmental Protection Agency survey found the majority of water softener systems tested contained less than 50 mg sodium per liter. Based on this data, a fourth of a liter (about an 8-ounce glass) of water would contain less than 12.5 mg of sodium, which falls within the Food and Drug Administration's definition of .very low sodium.. Individuals on a very low-sodium diet who are concerned about the amount of sodium in softened water should consider a water-purification system that uses potassium chloride instead of salt.
|
| Q. Will the Pelican Water Softeners remove iron from my water? |
Yes, Pelican Water Softeners will remove all ferrous iron (Fe++) or clear iron. If other types of iron are present in your water, the Pelican Iron Removal Filter is recommended in addition to the Pelican Water Softener, because oxidized forms of iron in raw water will damage the softener resin.
Iron in drinking water is not considered a health hazard but it tastes bad and leaves an unsightly residue anywhere you use water in your home, such as the washing machine or toilet. Soluble iron leaves behind a reddish brown residue on glasses and sinks. Insoluble iron can cause water to take on an unsightly rusty red or yellow hue.
In well water, the majority of iron occurs in its ferrous state. Iron removal from water is accomplished the same way other minerals are removed, by exchanging the iron with salt/sodium. Then the iron is removed from the softener resin bed through backwashing and regeneration. The efficiency of a water softener in removing iron depends to some extent on the iron concentration, water hardness, and pH level of your water. Even ferrous iron can clog and foul the softener resin, so periodically, a resin cleaning compound should be used to remove iron particles.
|
| Q. How much salt is added to my water from the Pelican Water Softeners? |
It depends on the hardness level of the original water. For example, drinking a quart of softened water with a hardness of 20 grains of hardness will add 150.0 milligrams/quart, of sodium the equivalent of less than a tablespoon of ketchup or a slice of white bread.
|
| Q. What type of salt should I use in the Pelican Water Softeners? |
It is recommended that coarse salt be used, which most grocery stores carry in bulk. Block salt should never be used.
|
| Q. Will I notice a pressure loss after installing a Pelican Water Softener? |
With all brands of water softeners there will be a pressure drop. The Pelican Water Softeners are of the highest quality available on the market therefore the pressure drop will be very low compared to most other brands.
|
| Q. Can the Pelican Water Softeners drain line be drained into my septic system and what type of affect will it have on the drain field? |
According to the Water Quality Association Technical Papers concerning septic tanks, ect. Concerns about salt and soil absorption rates were dispelled. The increased sodium content in the tanks discharge was shown to have no detrimental effect on the soils ability to absorb water in a normal drain field. Interestingly, certain soil conditions benefited from it. Additionally, when the softener's calcium-rich regeneration backwash emptied into the septic system, the discharge could actually improve the soils percolation. The conclusion drawn from these tests is that the softened water is not harmful to a normally operating septic system or drain field.
|
| Q. Can the drain line be located above the softener? |
As long as the water pressure at the softener is not less than 40 PSI and the run of the drain line does not exceed 15, your discharge line may be elevated up to 4 above the system. For each additional 10 PSI of water supply the line can be elevated an additional.
|
| Q. Is softened water recommended for use on my plants or lawn? |
If you are using sodium chloride to regenerate the resin, over time, softened water can be harmful to plants and other vegetation. It is recommended that outside faucets be bypassed from the softener.
Most plants cannot withstand high amounts of salt. The sodium in softened water interferes with the water balance in plants, tricking them into thinking they have absorbed more water than they actually have. So softened water causes plants to die of thirst. In addition to installing a bypass spigot on outdoor faucets, mixing softened water with rainwater to water your plants dilutes sodium levels and is less harmful to them. Salt buildup in soil results from using brine-based softened water. This is also harmful to grass, so it is not recommended for irrigating lawns or gardens.
|
| Q. How much salt will I have to add to the Pelican Water Softener? |
A typical home with a family of 4 with 2.5 bathrooms and a hardness of 10 will require a 32,000 grains softener that will regenerate every 11 days. The softener uses about 9 lbs of salt per regeneration, so if your brine tank is full (375lbs) from the start, you will not add salt for about 10 months.
|
| Q. Do I need to know what size my plumbing fittings are before I order the Pelican Water Softener? |
No, the Pelican Water Softener System comes complete with and 1 copper and CPVC plumbing fittings and also a drain line for your convenience.
|
| Q. Does the softener filter out chlorine and chemicals from my water? |
No, the Pelican softener is a water softener/conditioning system. Its sole purpose is to deal with the hardness in your water and not the contaminants. If you are interested in filtering chlorine and other chemicals from your water, you may want to consider the Pelican Whole House Water Filter and Softening Combo.
Carbon-based whole house filter systems are the most economical solutions. High quality systems can effectively remove sediment, rust, and other large contaminants, harsh disinfectants such as chlorine and chloramine, as well as lead, mercury, nickel, and other dissolved metals. Carbon/activated carbon filters also can remove dangerous organic compounds (such as VOC.s). It.s important to only buy a water filter that is NSF-certified and one that lists the testing done in the certification process.
|
PS48 |
Tank Height: |
62.5" |
Tank Width: |
11" |
Flow Rate: |
12 GPM |
Connection Size: |
1" |
Operating Pressure: |
25-80 PSI |
Operating Temperatures: |
36-120 F |
pH Range: |
6.5-11 |
| Grain Capacity: |
48,000 |
| Drain Size: |
3/4" (50' Supplied) |
| 18" by 33" Round Brine Tank |
|
PS80 |
Tank Height: |
62.5" |
Tank Width: |
13¾" |
Flow Rate: |
18 GPM |
Connection Size: |
1" |
Operating Pressure: |
25-80 PSI |
Operating Temperatures: |
36-120 F |
pH Range: |
6.5-11" |
| Grain Capacity: |
80,000 |
| Drain Size: |
3/4" (50' Supplied) |
| 18" by 33" Round Brine Tank |
|
|
- Pelican Advantage Series system
- Brine tank with float and drain line
- Bypass valve and fittings (1”)
- 50 Ft. drain line (3/4")
- Installation guide
|
|
