Pelican offers a wide a range of standard and specialty sediment replacement filters and accessories. All Pelican replacement sediment filters, o-rings, and accessories you will need to properly maintain your Pelican System(s) are available in this category. If you have any questions about what you may need please feel free to call a friendly customer service specialist for advice. 1-877-842-1635.
Quick Search: Standard Sediment Filters | Hot Water Filters | Pleated Filters | Mesh Screens | Carbon Block |These filters fit the following standard Pelican systems: PC600/PC1000, NS3/NS6, PSE1800/PSE2000, WF4/WF8, WF6/WF10, and Trojan sediment filter systems. If you have a custom pelican system with a larger 20" pre-filter system the filters you need are PC40-20
These filter replacements and O-rings fit the following standard Pelican HT10 and HT20 Hot Water Sediment Post Filter Systems.
Pleated/Washable filters can be used in areas of heavy sediment or for wells with heavy turbidity that require replacement too often for disposable filters. Washable filters can be reused and washed 3-4 times before replacement is needed. We offer a wide range of microns and sizes to fit your needs. If you are unsure which one would be best for you, just ask any of our customer service reps. Note: O-rings are sold seperately for all pleated filters.
The Rusco replacement screen elements should be replaced approximately every 6 months to a year. The Rusco replacement filter screen can be cleaned several times before needing to be replaced. The Rusco filter screen is easy to clean. No tools required.
Carbon block filters help reduce chlorine taste and odor and offer a 5 micron nominal sediment filter ability as well. These are recommended to be replaced every 3-6 months.