A 5-micron pre-filter system helps protect your new filter system and your home appliances from the damaging effects of sediment (dirt & debris) build up. The sediment in city or well water can clog faucets, damage appliances and even change the taste of your drinking water. The pre-filter system filters down to 20 times smaller than the diameter of ahuman hair or 5 microns in size. Learn More
Recommended for all Trojan UVs as well as any filter/softener system.
- Heavy duty 10" (or 20") whole-house filter housing
- (1) 5-micron pre-filter
- Pre-filter wrench
- Rust-free mounting bracket w/screws
 |
Upgrade to "A True Spa like Experience"!
If you are interested in water softening alternative/conditioning along with whole house filtration, you may want to consider the Pelican Premium Filter & Softener Combo Series. Learn more |
Disclaimer: The information on this website has not been reviewed by the FDA. Products offered for sale herein are not intended to treat, cure or prevent any disease or health condition. No medical claims are being made or implied. |
10" 5 Micron Sediment Prefilter System is rated
4.8 out of
5 by
4.
Rated 5 out of
5
by
ROCKY3 from
Excellent product/Excellent tech support
I HAVE HAD THE PC600 FOR TEN YEARS NOW AND IT HAS BEEN A GREAT WATER FILTER.PELICAN'S TECH SUPPORT IS THE BEST.
Date published: 2020-08-11
Rated 4 out of
5
by
L. Thibault from
I installed a carbon block chlorine filter in the beginning of the year to help my one kidney wife. Chlorine and chloramines from the water dept have been found to cause problem with kidneys ,if you believe the web. Better safe than sorry. After a few months the block filter was clogging (Pelican filters are not inexpensive) and rinsing them off doesn't work so we invested in a Pelican sediment filter in-line before it. My advice is to buy the combination filter system of sediment and carbon block in the beginning. It's a little more costly to buy them one at a time than to get them together and easier to install if bought in a set . My sediment and chlorine filters are now installed and working fine. The water is crystal clear and tastes great. If you don't have a whole house filter and saw what you were drinking, you would buy one right away.
Date published: 2017-10-26
Rated 5 out of
5
by
Paul Mathsen from
I sold them to the plumber that installed my softener and RO because he said I didn't need the pre filter and extra filters.
Date published: 2017-03-22
I have the 10" pre filter. Will the 20" lower filter, screw into the 10" upper unit?
How much does the 20" water filter allow over the 10" pre-filter?
Asked by: Doug
You are not able to mix and match sump sizes to the same head.
Answered by: Pelican Water
Date published: 2021-07-08
What is the flow rate of the BB10 with included sediment filter?
Asked by: Dc23
Up to 15 GPM
Answered by: Pelican Water
Date published: 2021-02-19
What would be the reason for getting the 20" as opposed to the 10" filter? House has 2 baths, dishwasher, washing machine, and a number of faucets.
Asked by: Ziska
What is the GPM flow of the 10” sediment filter
Asked by: Craig
I need extra o rings for the 10 in filter??
Asked by: Vincent
What is the gpm flow rate for these 10 or 20 water filters?
Asked by: Steve
How high off the ground does the b10 filter need to be to clean,change filter.for clearance
Asked by: Hurl57
| Q. What is the pre-filter system? |
The Whole House Pre-filter System reduces particulates down to five (5) microns in size. Routine replacement of this 5-Micron pre-filter media will increase the effectiveness and extend the life of your water filtration system. With average use, each filter is effective for approximately 6-9 months. The pre-filter system removes particles from the water that are the size of a red blood cell or 20 times smaller than a human hair.
|
| Q. Why is the pre-filter housing blue and not clear? |
The pre-filter housing is blue for good reason. Having a clear housing allows light to penetrate the housing which can cause algae to grow in the pre-filter housing. A blue non-transparent housing prevents the light from coming in contact from the water, thus the possibility from algae forming from light exposure.
|
| Q. Where does it mount? |
The entire pre-filter system mounts to the wall with the bracket and screws provided with the Pelican Water System. The entire pre-filter system is approximately 7 1/4" Wide x 13 1/2" High, very compact and easy to mount.
|
10" Pre-Filter Housing Specs: |
Dimensions: |
13-1/8" x 7-1/4" (333 mm x 184 mm) |
Maximum Temperature: |
100°F (37.8°C) |
Maximum Pressure: |
100 PSI (6.9 bar) |
Inlet/Outlet: |
1" |
|
4½ x 10” |
|
|
|
20" Pre-Filter Housing Specs: |
Dimensions: |
23-3/8" x 7-1/4" (594 mm x 184 mm) |
Maximum Temperature: |
100°F (37.8°C) |
Maximum Pressure: |
90 PSI (6.2 bar) |
Inlet/Outlet: |
1½" |
|
4½ x 20” |
|
|
- Heavy duty 10" (or 20") whole-house filter housing
- (1) 5-micron pre-filter
- Pre-filter wrench
- Mounting bracket w/screws
|
|
