Published: February 7, 2019

    Why Should I Protect My Water Heater?

    Homeowners often do a great amount of research and spend a considerable amount of money choosing the best water heater for their home. After all, any appliance will incur a hefty cost, so why not buy the best one?

    When you finally settle on a water heater you might assume that the warranty will still be honored if your water heater eventually malfunctions due to mineral buildup from hard water. After all, 90% of homes in America receive hard water through their tap. So why would such a common issue be a problem for homeowners?

    Hard Water Could Void Your Water Heater Warranty

    The answer is simple: appliance manufacturers are well aware of the damage hard water can cause, and they don’t want to accept responsibility or lose money for oversights from homeowners.

    Read the fine print of your water heater warranty. The most common cause of long-term water heater damage — hard water — is not covered by a great deal of manufacturers. In the conditions section you will likely find a statement that the manufacturer does not cover issues like scale buildup due to hard water. Even if your water heater stops working in less than five years you could be left with the bill.

    To make sure you are covered read the entire warranty. Some manufacturers will list the specific parameters that constitute “hard water.” For example, the warranty might state that damages won’t be covered if water hardness exceeds 200 milligrams per liter, if the iron level exceeds 0.3 milligrams per liter, or if the pH goes below 6.5 or above 8.5.

    If your water heater warranty contains parameters like these test your water quality immediately. Even if your water meets the specifications of your warranty you may want to install a Water Softener to increase the cost-effectiveness and the lifespan of your appliances.

    Water Softeners: Always a Wise Investment

     Hard water will spell trouble for your water heater regardless of your warranty. Mineral buildup at the bottom of your water heater will insulate the water from the powerful flames working to heat your water. As more sediment collects in your water heater every month the appliance requires more energy and more time to deliver hot water, raising your bill and degrading the water heater.

    Research has indicated that reducing the hardness of your water is crucial for the longevity of your water heater. When your water is treated your water heater can retain its factory efficiency rating for up to 15 years. Conversely, water heaters with mineral buildup experience efficiency loss of 48% after only a few years.

    Damage from hard water isn’t limited to your water heater: hard water can cause your showerhead to lose more than 75% of its flow rate due to scale buildup. Hard water also interacts negatively with soap, causing it to lose its cleaning abilities. You can’t afford to neglect hard water — install an industry-leading Water Softener to rest easy with naturally conditioned water and reliably hot showers for years to come.