Pelican Water Systems
Facebook Google Plus Twitter Twitter Twitter
(877) 842-1635
Customer Reviews Shop With Confidence Live Help
Pelican Pro Reverse Osmosis System

Pelican Pro 6-Stage Reverse Osmosis (RO)

6-Stage RO System
Pelican Model:
PRO-RO
Warranty:
1 Year
Suggested Retail Price:
$599.95
SALE PRICE:
$379.00*
* 37% FACTORY-DIRECT SAVINGS


Quantity:
 
Item in-stock
 
Water Shield Auto-Ship Program

Pelican Reverse Osmosis

The Pelican Pro 6-Stage reverse osmosis system produces high quality drinking water quickly and easily. The system features hygienically sealed filter cartridges and color-coded fittings for fast installation and easy service.

Compared to a traditional RO system, the unique Pelican 6-Stage RO delivers 30% more flow from the faucet and the 50 gpd membrane quickly refills the storage tank.


Watch our short video

RO Faucet Upgrades

6 Stages for Better Tasting Water back to top
  1. Compact Reverse Osmosis System
    The Pelican Pro RO features a four-stage prefilter, membrane and postfilter housed in a single cartridge. The fifth and sixth stage, an in-line carbon filter and calcite cartridge, is placed between tank and faucet.

  2. Green By Design®
    The Pelican Pro RO uses the latest in system design and membrane technology to reduce the amount of water down the drain by 50%. The Pelican Pro RO is smaller and uses significantly fewer resources in the manufacturing process than the typical 5-stage RO systems and offers a 6th stage most don't offer. Smaller packaging and a lighter shipping weight further reduce impact on the environment.

  3. Easy to Maintain
    Yearly maintenance is quick and easy. Simply remove the cover and replace one cartridge - no complicated plumbing connections, no tools required.

  4. Small and Lightweight
    The Pelican Pro RO is much smaller and lighter than the typical reverse osmosis system. The complete system, including tank, is approximately the same height and width as a standard 2-gallon tank and is less than 14 inches in depth. This smaller footprint makes it easier to install in cramped kitchen cabinet.

  5. Beneficial Minerals Added Back
    The Pelican Pro RO 2-stage post filter offers a carbon/mineral filter inside that adds back in the essential minerals (calcium & magnesium) to your drinking and cooking water which are removed from RO systems and Ultra filtration systems.
NSF Certified back to top
  • Arsenic V (pentavalent) 97.8%
  • Cysts >99.99%
  • Fluoride 96.30%
  • Lead 98.0%
  • TDS (Total Dissolved Solids) 96.50%
Easy Maintenance back to top
Maintenance for the Pelican Pro RO is quick and easy. Change your 2-Stage post filter every 6 months and your 4-Stage membrane every 18 months. All cartridges are designed to be changed without tools. When properly maintained, the Pelican Pro RO system will provide you with years of trouble-free service. The cartridges in this system must be replaced on a regular basis to maintain efficiency and to ensure high water quality.


Additional Features and Benefits back to top
  • Manufactured in the USA
  • Easy to maintain
  • Replace filter cartridges without tools
  • Top quality coconut carbon
  • Compact design saves precious under the counter space

Video Page

The Pelican Pro RO features a four-stage prefilter, membrane and postfilter housed in a single cartridge. The fifth and sixth stage, an in-line carbon filter and mineral cartridge, is placed between tank and faucet. The Pelican PRO RO is NSF Certified, offers 50% less water waste while giving you 30% more flow from the faucet.


Premium Whole House Water Filters / Softener Combo
Play Video
Learn About the Pelican PRO 6-Stage RO

 


Premium Whole House Water Filters / Softener Combo
Play Video
Pelican PRO-RO Installation Part 1 - Faucet

 


Premium Whole House Water Filters / Softener Combo
Play Video
Pelican PRO-RO Installation Part 2 - Feed Line

 


Premium Whole House Water Filters / Softener Combo
Play Video
Pelican PRO-RO Installation Part 3 - Drain

 

Certifications

This system has been tested according to NSF/ANSI 58 for reduction of the substances listed below. The concentration of the indicated substances in water leaving the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 58. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.

This system has been tested for the treatment of water containing pentavalent arsenic (also known as AS(V), As+5 , or arsenate) at concentrations of 0.050 mg/L or less. This system reduces pentavalent arsenic, but may not reduce other forms of arsenic. This system is to be used on water supplies containing a detectable free chlorine residual at the system outlet or on water supplies that have been demonstrated to contain only pentavalent arsenic. Treatment with chloramine (combined chlorine) is not sufficient to ensure complete conversion of trivalent arsenic to pentavalent arsenic. Please see the Arsenic Facts section of the Performance Data Sheet for further information.

Testing was performed under standard laboratory conditions, actual performance may vary. Incoming water must be free of potential
membrane foulants such as Iron, Hydrogen Sulfide and Manganese. Efficiency rating means the percentage of the influent water to the system that is available to the user as reverse osmosis treated water under operating conditions that approximate typical daily usage. Recovery rating means the percentage of the influent water that is available to the user as reverse osmosis treated water when the system is operated without a storage tank or when the storage tank is bypassed.


National Sanitation Foundation (NSF) Certification back to top
NSF/ANSI Standard 058 - Reverse Osmosis Drinking Water Treatment Systems

 

Installation Diagrams and Guides

Diagrams / Owners Manual back to top
Owner's Manual Pelican Pro 6-Stage RO (link opens in new window)


Specs and Product Information back to top
PRO-RO
Production Rate:
55.30 L/d (14.61 gpd)
Recovery:
26.76%
Temperature:
4°C - 38°C (40°F - 100°F)
Efficiency:
15.82%
Pressure:
275kPa - 552kPa (40-80 psi)
System Dimensions: 14.5” H x 12” W x 4.75” D

System Includes back to top
  • Product water storage tank
  • Tank valve
  • Tank tubing (3/8” white)
  • Air-gap faucet
  • Drain connection assembly
  • Drain tubing (3/8” white)
  • Quick connect fitting
  • Drain tubing (1/4” black)
  • Faucet tubing (3/8” blue)
  • Feed water tubing (1/4” green)
  • Inlet fitting with shut-off
  • 4-Stage Membrane
  • 2-Stage Carbon/Mineral post-filter

Manufacturer's Warranty Information back to top

Manufacture's Limited 1-Year Warranty

The Limited Warranty extends to the original purchaser of the system. This warranty covers all parts and factory labor needed to repair any Manufacturer-supplied item that proves to be defective in material, workmanship or factory preparation. The above-mentioned warranty applies for the first full calender year from date of purchase. These defective items are subject to the following exclusions: membranes, filters, O-rings, and all other parts or components that require regular replacement as a result of ordinary usage.

This Limited Warranty applies only if the system is installed, used and maintained in compliance with all instructions and requirements enclosed with the system. This warranty will be void for failure to observe the following conditions: 1. The system is to be used with potable water from a municipal water system. 2. Feed water pressure to the unit is no less than 40 PSI and no greater than 80 PSI. 3. The system is to be used on water supplies with chlorine concentrati ons of 1.0 mg/L (ppm) or less. 4. Feed water temperature to the unit must be no less than 40 F and no more than 100 F. 5. Total dissolved solids in feed water must be less than 2,000 mg/L (ppm). 6. Feed water must have a pH between 4 and 8. 7. Turbidity must be less than 1.0 NTU. 8. SDI must be less than 5. 9. Feed water must be completely free of iron, manganese or hydrogen sulfide. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfecti on before or aft er the system.




Water Shield – Making Your Water Treatment Convenient Water Shield Program – Replacement Filters & Parts